|
| E-Katalog Ürün ve Servisler |
|
HG50 PIPE MILL
Kategori : Boru Sanayi
|
The mill is intended for manufacturing of round pipe of Φ12mm-Φ50mm with thickness of 0.5mm–2.0mm from cold-rolled and hot-rolled coil strip by means of unclosed tubular blank with its subsequent welding into tube, edge heating by means of solid state high-frequency welder, longitudinal seam welding in rolls of tube welding machine, cooling, further sizing or shaping and on-stream cutting of endless tube in measured lengths.
Finished product will be of round, square or rectangular pipe.
II. The technical flow of the production line
SteelTapeDouble-head un-coiler -Strip-head Cutter and welder-Spiral accumulator-Forming section(Flattening unit +
Main driving unit +Forming unit +Guide unit +High frequency induction welding unit +squeeze roller)+ De-burr frame-Cooling unit - Sizing unit and straightener -Flying saw under computer-control - Run-out table-Semi-Automatic packing machine
III. Basic conditions:
a) Steel Pipe Specification
1. Pipe diameter: 12–50mm
Pipe Thickness: 0.5– 2.0mm
2. Square Pipe: 14X14mm –40X40mm
Rectangle Pipe: 10X20mm –25X50mm
Pipe Thickness: 0.5 – 1.6mm
3. Pipe Length: 6-9m
4. Length Tolerance: 0-4mm
b) SteelTape Specification
1. Material: Low Carbon steel & Galvanized steel
(δb≤500Mpa, δs≤235Mpa)
2. Steel Tape: Inner diameter: 508mm
Outer diameter: max=2100mm
Strip steel width: 40mm-160mm
Strip steel thickness: 0.5mm-1.6mm
The maximum weight: 3.0 tons
c) Electricity
1. Dynamic power: AC380V±10%, 3phases, 50Hz±1.0%
2. Control Power: AC220V±10%, one phase, 50 Hz ±1.0%
d) Electric installed capacity: appro. 350KW
e) Cooling water
1. Reservoir for High Frequency equipment: 15 m³, one set
2. Reservoir for circulating cooling water: 15 m³, one set
f) Compressed air
1. Pressure: 0.4Mpa
2. Flow: 0.5m3/h
g) Production capacity
Annual output: 10000 ton, according to the yearly working days、daily working hours and the products.
h) Line speed: 50-120m/min
E-katalog ürün yayınlama servisi aktif değil !!
Bu servis sadece GOLD üyeler içindir !!
|
|
|
| Iletişim Bilgileri |
|
No.298 of Zhonghua North Street,Shijiazhuang City, Hebei P.R. China 050000
hebei
/ Çin
Tel : 86-311-68032581
Fax : 86-311-68003887
|
Url :
http://www.tengdimc.com
E-mail :
Ilgili : cherry Ma
/ manager
|
|
Market Ekipmanları
Firma Ana Sayfa